-
https://forum.drbacke.de/viewtopic.php?f=8&t=982&start=10
```
# service
0xffe0
# characteristic
0xffe1
# request device info
{0xaa, 0x55, 0x90, 0xeb, 0x97, 0x00, 0xdf, 0x52, 0x88, 0x67, 0x9…
syssi updated
1 month ago
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
Hi @syssi
I am using your jk-bms components for quite sometimes and I discovered the following (may be related, I am not quite sure)
My setting was:
esp32S2Lolin mini
uart on Gpio9 and Gpio10
I …
-
Hi,
I installed the project on HA, changed the mac address, the BT of the box is TP_123456, the log cannot connect.
The BOX BASEN 280/300 ah is as follows
https://www.basengreen.com/it/PRODOTTI/cus…
-
1. Encrypt Payload via AES
```
AES/CBC/PKCS5Padding mode: encryption
AES/CBC/PKCS5Padding key Base64:OlLzwi7W/N5b9pamwCyecw==
AES/CBC/PKCS5Padding key Hex:3a52f3c22ed6fcde5bf696a6c02c9e73
AES/C…
-
Hello
I tried to complie the esp32-heltec-balancer-ble-example.yaml file and modified it a bit for the use of my wemos S3-mini
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-i…
-
-
Hi there,
I try to make it work on recommended Atom S3 Lite with CAN module but no luck, then I found some inconsistency in the config files which don't even compile, for example there is a led defin…
-
I have the problem that the ESP32 loses the connection to the two NEEY balancers via BT. Only “nan” is transmitted as measured values.I have the problem with all versions of ESPHome and have already g…
-
I don't see any mention in the readme, and in fact, the readme seems to focus solely on the uart method of connection, but I can't seem to get the switches to show up in Home Assistant. I am using the…