-
When I follow the WIKI
[https://github.com/AlkaMotors/AM32-MultiRotor-ESC-firmware/wiki/Flashing-Tekko32-45A-Single-ESC](url)
to flush the bootloader, I ran into the following problems:
1.Add th…
-
Hi, I guess this is more of a pynitrokey issue rather than a firmware Issue, else I could add an Issue to the Firmware Repo.
I wanted to update my Nitrokey from v1.6.0 to 1.7.0.
I tried this in …
-
## Environment
- Development Kit: [ESP32-PICO-Kit]
- Kit version (for WroverKit/PicoKit/DevKitC): [v4]
- Module or chip used: [ESP32-PICO-D4]
- IDF version (run ``git describe --tags`` to …
-
Heya, I'm using a bootloader name Ventoy. This is a Grub bootloader that allows you to use multiple ISOs on one USB. I was just wondering if you happen to know if there is anyway to get the icons next…
-
Hello,
My 2nd gen nest hub bootloader seems fixed (exploit fails), but would it be possible to attempt a bootloader downgrade using a vulnerable recovery.img from a previous release?
If so does …
-
Hi :wave:
since a recent version of protobuf, protobuf and the generated `dfu_cc_pb2.py` (in `trussed/bootloader/nrf52_upload/dfu`) seem to be incompatible:
```
Traceback (most recent call las…
-
****Hello sir,
Here we are trying to add our custom bootloader on genesys2 board.We have our elf file. We flashed that elf file on SD card but we are facing following issues.
invalid SD card format …
-
### Answers checklist.
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used th…
-
This *may* be related to my first attempt not having system.img properly put into the correct directory.
[*] Power off the device, press ENTER, and then plug the device in:
```
MTK Flash/Exploi…
-
I've been trying for awhile to get the latest pre-built USB_uC_145X_GENERAL_NO_XTAL.hex file (CRC:DA31352F) working, and it seems to be configured incorrectly. According to the source, the 145X_GENER…