-
Hi,
I just noticed that when I make a drawing in LibreCAD and read it in CAMotics, only the first bit of the spline is rendered, so I started digging into dxf.tpl and found that it's not running th…
-
So that I can test the G-Code on another PC, do I want to configure a dummy milling machine?
How can I do that?
-
I am looking for a platform that either has a feature or would be a good place to start for "Perpendicular slice viewer"
Almost every slicer has a Gcode preview tool. The issue I have is that it o…
-
GCode::Tool Path bounds ((0,0,-0.127), (85.4862,25.4406,12.7)) dimensions (85.4862,25.4406,12.827)
Computing surface bounded by ((-2.20181,3.04875,-2.3413), (92.2575,29.0924,0.107949)) at 0.0816416 g…
-
I'm a newcomer to this project - excellent work.
I am very interested in having shank and rapid move collision detection. Since this is of interest to our company, we would gladly sponsor developm…
-
In a perfect world.. I could take these designs and send the gcode to my cutter/engraver! The interior polygons could use 50% laser strength to merely score the material, and then the end of the cutti…
-
I was using `print` to insert gcode to work around some vagaries of my CNC, and it seems like I get different output when I simulate and export gcode vs when I run tplang directly. TPL:
```
print("…
-
This is difficult
-
v5.0.0 vectored path mode shows correct tracing image, but results in partially failed cut.
![ScreenShot059](https://user-images.githubusercontent.com/49736172/56398329-421291…
JJZ71 updated
5 years ago