-
I am trying to use the hardware serial port along with the USB on Catena4612 (D0, D1). I used the SerialPassThrough example as shown below:-
`void setup() {
Serial.begin(115200);
Serial1.be…
-
Existing code uses `Serial.dtr()` as a way to avoid a huge delay when checking `! Serial` on USB ports-- the old BSP had a blocking millisecond delay every time `! Serial` was invoked. The new library…
-
Need to Turn-off RS485 transceiver and Booster before sleep.
This changes might move to Catena-Arduino-platform.
-
Per the documentation ukaze, we need to pull the info out of here that is not specific to the 4450, and put it someplace central. Then this readme will follow the pattern.
Every sketch needs a READ…
-
I'm trying to use the `arduino-lmic` library within a PlatformIO project.
My `platformio.ini` looks like this:
```
[env:megaatmega2560]
platform = atmelavr
board = megaatmega2560
framework …
-
With one of latest commits after Sep 9th 2019 joining on EU868 (tested with TTNv2) is broken. Event "Join Wait" is endlessly reported. It seems the join accept packet by the gateway is somehow not pro…
-
Using the libary with an ATMEGA328P, I keep observing that the library hangs on the following line:
ASSERT( (readReg(RegOpMode) & OPMODE_MASK) == OPMODE_SLEEP );
For context, here's the containi…
-
We need to provide a way to override USBD_LL_ConnectionState() function for Catena 461x board.
So Catena 461x Arduino platform code can provide own method by reading VBUS voltage.
-
In the OTAA example sketches, it helpfully instructs you as to what endianness you should use for each item.
Unfortunately, the same cannot be said for the ABP example. After extensive testing I'm …
-
Please add something like this, rak811.json
STM32L161 mcu.
https://www.aliexpress.com/store/product/RAK811-LoRa-Tracker-Board-MAX-7Q-GPS-Module-and-MEMS-Sensor-Wireless-Remote-Positioning-Solution-L…