-
Is there any specific reason that the CM4 is supported in the oldstable and stable branches, but the CM4S is only supported in the stable branch?
Then also with a previous build of Bullseye OS on a…
-
I've been following this repository for quite long time. As a Raspberry Pi fan, we've been working on the Radxa Taco for a while, which is an ultimate CM4 carrier board designed for nas/server/router …
-
-
### Describe the bug
Hi,
I have a CM4 with EMMC and without wireless with official CM4 board and sometimes after reboot the NIC connection disappears. To get it work again either re-plug the pow…
-
See: #7
I would also like to make sure any other little incompatibilities are fixed up.
I could also rename the repo to sbc-cluster, maybe... but for now I like 'Pi Cluster' since the majority …
-
Parsers:
```
parsers: # array
- reg: ^.*$
# - reg: ^.*$ 匹配所有订阅,或 - url: https://example.com/profile.yaml 指定订阅
# 下面是删除服务商自带的策略组和规则
code: |
module.exports.parse = (raw, { yaml }…
-
Iam still interested in estimating Solar Irradiance with a Raspberry All Sky Imager.
I would like to know, if the color calibration was already evaluated? How precise is the sRGB colour spaced pro…
-
I have `hardware.raspberry-pi."4".fkms-3d.enable = true;` and found that the deviceTree failed to build with recent `unstable` Nixpkgs. The error was the generic "FDT_..." one which wasn't very helpfu…
-
**Kairos version:**
2.4.3
**CPU architecture, OS, and Version:**
arm64-rpi4
**Describe the bug**
After flashing Kairos onto a Raspberry Pi Compute Module 4 eMCC, the module fails to boot. The…
-
I have 4 brand new Raspberry Pi CM4s, running 64 bit Raspberry Pi OS Lite (no GUI), on the nodes, and with GUI on the master.
all 4 failed to start the service:
`level=fatal msg="failed to find memo…