-
The firmware defaults to enabling `DAP_SERIAL_LOG` in [`DAP_config.h`](https://github.com/myelin/arduino-cmsis-dap/blob/master/DAP_config.h#L69), which is the USB serial port on the Teensy. Things wi…
-
**Describe the bug**
probe-rs fails to use the debugger on NXP's LPCxpresso54608 board
**To Reproduce**
Steps to reproduce the behavior:
1. program the CMSIS-dap fw on NXP's LPCXpresso54608 dev…
-
```python
while 1:
session = ConnectHelper.session_with_chosen_probe(
unique_id=debuggers[probe_sel].unique_id,
target_override="STM32f412xG",
auto_open=False,
)
…
-
Make a "rp2040 dap" with [this](https://github.com/ataradov/free-dap/blob/master/bin/free_dap_rp2040.uf2) , and use it to debug another rp2040 is very cool, debug is OK, but download shows error.
Thi…
-
I have a [Dip Dap](https://os.mbed.com/components/DIPDAP-LPC11U35/) and I'm trying to use it to program the bootloader of a FRDM-K22F as described [here](https://os.mbed.com/blog/entry/DAPLink-bootloa…
-
New to hardware and MCUs in general; apologies in advance if there's something obvious going on here.
I have a Picoprobe with the latest firmware which is ostensibly connected correctly to another …
-
Testing a 1.5MByte file
```
dd if=/dev/zero of=test.bin bs=1500000 count=1
```
and using the Picoprobe setup (two Picos, one flashed with https://github.com/raspberrypi/picoprobe, latest 1.0.3 f…
-
hi,
I'm working on a project where I would like to program an STM32G07x chip with ESP32 but this STM family is not supported now.
Is there a way to add it easily?
I have extended the model here…
-
Great work much appreciated.
----->>>>>comming to my issue I was able to flash this project
https://github.com/martin-ger/esp32_nat_router/blob/master/main/esp32_nat_router.c
---->>>> but your…
-
**Describe the bug**
I have a dual chip setup where I would like to debug both chips simultaneously. My setup is:
RPi debug probe -> openocd -> chip 1 Master (cortex-M3)
RPi debug probe -> openoc…