-
Hi, I have another issue regarding the IMXRT1176 :smile:
I'm trying to experiment with both the builtin target and the cmsis pack one. The builtin targets allow to debug only one core at a time, s…
-
### Help,
**how to fix this problem ?**
**operating system: Windows 10 64bit**
GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593-g23ad80df4 (2019-04-22-20:25)
Licensed unde…
-
### Prerequisites
- [x ] read the documentation pages carefully (https://openocd.org/doc/pdf/openocd.pd)
- [x ] check the [GitHub Discussions](https://github.com/xpack-dev-tools/openocd-xpack/disc…
-
**Describe the bug**
After a while (depending on the using `probe-run` or `cargo embed`) both terminate with:
```
RTT error: Error communicating with probe: A core architecture specific error o…
ctron updated
6 months ago
-
上周末硬件组的人说想搞个无线下载器,就用ARM开源的CMSIS-DAP协议,结果就这一句话我自闭了四五天,终于在一篇非常棒的文章里找到了方法,因为写的太好了,所以这里我直接把原文翻译成中文,英文原文见:[usb_express:cmsis-dap [Geniekits]](http://wiki.geniekits.com/doku.php?id=usb_express:cmsis-dap)
…
-
I can not upload Sketchs to the Micro:bit v2 from a Macbook Air M1. It keeps saying the following error messsage:
Error: No Valid JTAG Interface Configured.
Arduino: 1.8.19 (Mac OS X), Board: …
-
**Summary**
I recently bought a stack of puya py32 mcu’s after reading this [article](https://jaycarlson.net/2023/02/04/the-cheapest-flash-microcontroller-you-…
-
CMSIS-DAP firmware needs to be version V1.10 or newer to support SWO trace. How to get version V1.10 or newer to support SWO trace?
-
Created from discussion in #1488.
From @dev-apcs:
The snag I have is when using gdb to attach without flashing: the cpu hard-faults.
I tracked this down to vector table corruption - or rather…
-
3.4 Verifying the installation - doesn't work for me.
I have a bbc micro v2. and installed all the required stuff for windows
when running: `cargo embed --target thumbv7em-none-eabihf` - I get the f…