-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Ok so I got the released CVLM version for my F4. There are 2 alternative I want to use my laser.…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I installed the ender extender 400xl and changed x bed size, y bed size, z max position, x max p…
-
Olá Tomas.
Primeiramente obrigado pelo firmware, isso ajudou muito a comunidade, continue esse bom trabalho.
Minha duvida é qual o objetivo do "Autorun do CRTouch", para que serve?
Obrigado
-
Ender 3 S1 Pro
X-45 Y0 CRTouch mount
X can actually go up to 256
So for X210 probe actual nozzle position has to be at X255 which is possible
Firmware [MARLIN-E3S1PROFORK-BYTT-v013]
``…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
If you set your z-probe offset to -1.5mm and run the z-probe wizard, then set the z-pro…
-
### Bug Description
This is `bugfix-2.0.x` commit d84aff701e10a49d5ccc69ce323fdb0fdb84b6db
Long travels exhibit stuttering movement when ABL is configured and enabled.
If I switch ABL off by …
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Hello, I have been using it for a while in my ender 3 v2, this latest version is available and s…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
i have the ender 3 v2, a cr touch, and a pei spring steel sheat on my bed. but the leveling does…
-
no idea what i am doing wrong, but it seems like the created mesh is not being used. no matter what i do the middle is always too high and the the corners too low. this is my g-code
G28 ;Home
M4…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
problems compiling with fontutils.ccp
### Bug Timeline
i don't if iit's an issue or a bug
…