-
# Aktuelle Situation
Beim Import der Geräte von deconz werden alle/sehr viele Datenpunkte übernommen und das entsprechende Gewerk gesetzt. Bei der Auswahl eines Geräts im Layout wird der erste/oberst…
macpo updated
2 years ago
-
### What happened?
I have tried at least a dozen times to pair these. I have many of them paired to Deconz for about 2 years. No matter how many times I reset and try to pair to Z2M it never works...…
Ltek updated
4 months ago
-
Some users of Home Assistant’s [ZHA integration](https://www.home-assistant.io/integrations/zha) with ConBee and RaspBee Zigbee Coordinator adapters from dresden elektronik have posted that they could…
Hedda updated
3 months ago
-
Hi
The conbee device serial protocol sometime send an unsolicited command 0x19 that is not documented in
https://deconz.dresden-elektronik.de/raspbian/deCONZ-Serial-Protocol-en_1.21.pdf
An…
-
I've been trying to write network settings to a Conbee II and am unable to progress with one part of this puzzle: setting the frame counter.
The serial protocol describes a "0x27" network parameter…
-
Reading the code as far as I can understand it this should also work with a raspbee. As you use the RESTAPI to connect to the deconz infrastructure should just knowing the api key and the port where y…
-
Hi
Sorry if this is not the proper repo. But I have the same issue as mentioned here https://github.com/home-assistant/core/issues/78470. That issue was however closed and locked so I am not sure if …
-
New Debian release "bookworm" is out.
- [x] firmware move `config.txt`
- [ ] check all 3rd party repos for bookworm upgrades and compatibility
- - [x] [deCONZ](https://github.com/dresden-elektron…
-
**Is your feature request related to a problem? Please describe.**
The device is not supported, I request a full support of this device.
**Describe the solution you'd like**
Full support for the …
-
I have a led strip controller from Gledopto. We have an issue when we change the light color, the light changes the color with a transition time. but we have the node configured to have a transition T…