-
ETS-03-29-2022
_SA 0 was failed for **test results** in Part 9_. This complaint may have cascaded from #1091.
**The tool falsely flags that our controller erased DM5 data.**
17:56:46.2271 De…
-
## Before you post a new issue - you must first check the following (and check the boxes with an "X" below)
- [V] 1.) Can you login using the smartphone app We Connect (not We Connect ID or We Connec…
-
### Description
There some Artillery Genius PRO or X2 that are not able to flash the LCD firmware.
### Steps to reproduce
Try to flash as usual
**Actual behavior**
MKSTFT28.bin is not d…
-
Place the chocks/ safetycones via model-manager like the walker
Advantage:
- the model acts like a scenery model, will be recocgnized as collision object - no need for a workaround with the parking …
HHS81 updated
11 months ago
-
Hello,
do you see a simple way to provide DTR and/or RTS.
There are projects which could use a DTR.
One example could be Chinese diesel heaters or programmer adapters for VHF radios.
They have…
-
Any thoughts on having altitude adjustments to your fuel ratios?
Maybe add a pressure sensor?
-
Hello.
I am new in all this staff and in coding. can you tell me please, what I am doing wrong when building you project?
Here is a terminal output:
`[806/860] Building C object esp-idf/main/C…
-
Please include the following Data In unit Tests for Task 5.
10:00:15.5579 18FECE00 [8] 00 00 14 27 E0 1E E0 1E
Vehicle Composite of DM5:
A/C system refrigerant not supported, comple…
-
Review the following enable bit messages for enable bit criteria enhancement.
Note DM5 content for issue #860
Start Test 1.13 - DM5: Diagnostic Readiness 1: Monitor Readiness
10:32:51.3757 Glo…
-
I believe the newer generation has this option to keep allowing loads when the temperature drops below a set value. For me, having the 2nd generation BMS, it always requires me to set the temperature …