-
I'm trying to use Artoo on Ubuntu 16.04 LTS with a Digispark, following the instructions here. Everything worked until:
```
$ artoo connect scan -t usb
Could not find command "connect".
```
Just run…
-
"Caricamento completato:
Archiving built core (caching) in: C:\Users\espos\AppData\Local\Temp\arduino_cache_378279\core\core_digistump_avr_digispark-tiny_f5b2c1589d4f053c6745b869508b9318.a
Lo sket…
-
I am using the Arduino 1.8.9 IDE on a ATTiny85 clone with a BME380. 10K pullups are on the I2C lines. An external battery assures that 5v is adequate.
I can compile properly. I can serial print …
-
In the code below, notice these lines:
```
//test prints
uint8_t buttonLEDstate = TrinketKeyboard.getLEDstate();
TrinketKeyboard.print(buttonLEDstate,BIN); TrinketKeyboard.print(", "); TrinketK…
-
When using your installation script:
```
git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline
sudo apt install libusb-dev
make
sudo make install
```
I got t…
-
I manually added, library to ArduinoDriod and compiled the .ino file which includes DigiKeyboard.h library, then I'm getting this error.
Note: complied from Android device.
-
https://github.com/mik3y/usb-serial-for-android
Reference: http://android.serverbox.ch/?p=427
https://www.youtube.com/watch?v=CVSdz_bDXPs
Link docs:
https://github.com/mik3y/usb-serial-for-android/wi…
-
Hello All,
I installed the digispark board as per digistump wiki and wanted to try the digiblink example, when I got above error.
below on may find my full error text.
Can anyone help???
`…
-
I love the concept of this project and it saves me from needing to duplicate the effort but I was wondering if you have considered using an ATtiny85 board (like a digispark) as a minimal solution with…
-
Arduino: 1.8.5 (Mac OS X), Board: "Digispark Pro (Default 16 Mhz)"
Error while burning bootloader: missing 'bootloader.tool' configuration parameter
This report would have more information with
…