-
Tested listening to a repeater.
If you put the radio in VFO mode on a DMR frequency. With Digital Monitor CC and Slots set to any, so that it should receive all stations using any color code or slo…
-
Hello,
we'd like to support MMDVMHost from server-side (replacing brandmeister or HBLink with custom solution)
However reading this docs: https://wiki.brandmeister.network/index.php/Homebrew_rep…
-
Don't know of if it is possible to create a download list CSV or XLSX from last heard, sorted and selected on days last heard see example below. Make it easier to update your contact list, and delete …
-
First I would like to thank all for the hard work put forward to make the hobby great, second I understand fm is beta and wanted to share my findings.... Here goes..... Using a set of tk 8180 kenwood…
-
ZUM 1.01 board, Arduino DUE, latest firmware and software commits updated 12/06/2017, GM340 radios.
On mobile/portable stations where the signal tends to have fading it happens that a station opens…
-
Hi Andy, I'm using YSF2DMR to bridge a YSF reflector to a XLX, all is working fine so far except that when there is some small interruption in a YSF transmission then YSF2DMR is apparently unable to r…
-
Jonathan,
Is there any possibility / plans to add a remote control feature (like the one ircDDBGateway has) to enable swapping TalkGroups on DMR for example.
This is possible via the Brandmeiste…
-
When I want to write back the data for the device.conf file I get many errors of this type:
```
Zone 5a 'XYZ': channel 65536 not found.
```
Firmware is the newest: 1.15
-
At idle, the ZMQ socket will supply ~25,000 empty samples per second, however, when MMDVMHost pushes mmdvm-sdr into tx mode, the samples per second will jump to on average, 1.9 *million* samples per s…
-
Hi,
after testing a lot we found that the actual OVCM implementation has some severe issues and does not work anyway - fist the issues, what is more critical :)
It appears that also in DMR traff…