-
-
One of us:
> Hi. We're making it easier to connect that thing to the other thing that sometimes goes through this thing over there but can also go through that thing way up there.
Someone else:
> …
-
Hello,
I know it is a rather vague question, but I was wondering if I can trouble the kind folks here
for an example walkthrough of a HTTPS POST example for the SIM7000 shield.
I am able to do…
-
Hello,
I'm working on a project which builds heavily on the LTE_Demo in order to send SMS when sensors on as esp32 detect certain conditions. These SMS functions are meant to complement the project…
-
Node-red crashed when https://github.com/urbiworx/node-red-contrib-freeboard is installed.
Node-RED version: v0.13.1
Node.js version: v0.10.38
```
5 Apr 12:18:08 - [red] Uncaught Exception:
5 Apr …
-
Hi,
I recently ordered a SIM7000A shield from Amazon. This shield is a "version 5" design and shipped with "B01" firmware.
None of the commands in the [HTTPS AT commands guide](https://github.c…
-
Running the IOT_Example and it wont enable the GPRS? it was able to acquire gps, i know the hologram card is activated because i used it on another project. got any ideas?
-
Hi,
I have a Kano Pixel, which runs on the ESP32, with a few peripherals attached to it (a NeoPixel R/G/B array, an analog potentiometer, about 7 momentary buttons, and a battery). I flashed Micro…
-
Please!
-
The Sparkline widget only seems to function as a realtime dynamic chart. Can it be used as a static "historical" chart also? If so, how does the data need to be formatted? I tried [0,1,2,3] and ["0"…