-
KNOWN ISSUES
It is not compatible with ARDUINO LEONARDO and not tested under ARDUINO DUE and newer boards.
ARDUINO LEONARDO Boards aren't compatible with the add-on required for RS485 compatibility.…
-
Great work!
I am wondering if it's possible to use this more affordable cc2652 module from [cdebyte](https://pt.aliexpress.com/item/1005002602963103.html?spm=a2g0o.productlist.0.0.6c33230c5qvKxY&al…
-
Koenkk mentioned requires new znp firmware projects from a newer SimpleLink SDK so wonder if compatible with zigpy-znp?
https://github.com/Koenkk/Z-Stack-firmware/discussions/476
Back-story; SML…
Hedda updated
4 months ago
-
nymea (https://nymea.io/users) is a FOSS smart home/IoT platform with good ZigBee support. Would be nice to see it on the list of gateways.
Currently supported ZigBee adapters:
* All phoscon models …
-
Hi,
I tried to get the modules running, but without success. How can I check if the wiring is correct? Maybe a small test-sketch which reads a known register? And How can I produce a signal I can see…
-
### What happened?
Since some time ago, I've observed a new zigbee2mqtt device in Home Assistant. It contains the sensors that until then, I configured using the "package" option.
One of them, is …
-
Zigbee is becoming the de facto standard in home automation. It would be great if `OpenMQTTGateway` could support this protocol. Below I have a write up about the most promising solution at the moment…
-
I loaded the latest firmware to a CC2350+2195 but cannot get the temperature sensor to work. I tried router and enddevice firmware and connected a ds18b20 sensor to P0_7.
Zigbee2MQTT:info 2021-05-…
-
Hello,
I've been working with the `softwareserial` library and I've set up the wiring for my Arduino module accordingly, modifying the RX and TX pins as follows: `SoftwareSerial mySerial(2, 3); // …
-
Please consider porting ESPurna to the new Sonoff Zigbee Bridge (Sonoff ZBBridge)
- https://www.itead.cc/sonoff-zbbridge.html
Itead has just launched Sonoff ZBBridge as an inexpensive Sonoff Z…
Hedda updated
2 years ago