-
### Describe the bug
This USB card reader works fine in Raspberry Pi OS, but it is not recognised by the USB boot loader.
### Steps to reproduce the behaviour
Tried booting a working uSD card using…
-
Hi,
I tried to run this library with an Arduino Zero and [this PN5180 Board](https://github.com/ATrappmann/PN5180-Library/files/2502996/PN5180.R1.1-170710_SCH.PDF), but it generates the following e…
-
Attach (recommended) or Link to PDF file here:
https://cdn-reichelt.de/documents/datenblatt/A300/EE24LC01_EE24LC02%23MIC.pdf
Configuration:
- Web browser and its version: Firefox 104.0
- Operati…
-
Hi there,
first: I'm a professional JavaCard developer and followed your setup guide including Martins GlobalPlatform Pro (which is default here anyway). The reader is a Gemalto Prox-SU as this one…
-
Hy
I have a Pi 3 running PiJuice with an NFC reader attachted to I2C and the 5v port of the Rpi.
When I power down the pi with
```
from pijuice import PiJuice
import os
pijuice = PiJuice(1,…
-
https://github.com/luxonis/depthai-core/blob/main/include/depthai/device/CalibrationHandler.hpp
https://github.com/luxonis/depthai-core/blob/main/src/device/CalibrationHandler.cpp
The above Calibrat…
-
Has anyone had any luck reading/writing the 450mc chips? I've noticed they are slightly different in how they store everything (UID is 23-xxxxxxxx, no eeprom file but a "rw" file, "rw" file shows as …
-
**Outline:**
- Section 0: Overview
- Section 0.1: My recommended target Raspberry system
- Section 1: Graphics optimization and resolution auto-detection
- Section 1.1: Configuration explana…
-
Hi,
After upgrading to v01-1.2.5, I've experimented a very strange bug with my Sigma R16.
Sometime, **during a print**, the "unload filament" procedure seem to start for no reason.
The extruder…
-
Hi Tijmen,
Ik ben al een tijdje bezig met het candle smart home systeem. Helaas loop ik stuk op de foutmelding ! NOT CONNECTED TO GATEWAY wanneer ik een thing toevoeg na het toevoegen van de candle…