-
AndrOBD does currently **not fully** support [STN chips](https://www.obdsol.com/solutions/chips/) from Obd Solutions.
> The STN11xx/21xx OBD Interpreter ICs are based on the robust OBDLink® technol…
-
Hello my friend. I have a bluetooth elm327 adapter pic18f25k80. But cannot compile the project since I have no pic for this compiler. You can upload the hex file?
-
With the new update to version 1.67 it is not longer possible to write the TPMS Sensors with a Konnwei KW902 ELM327 to a Zoe Q210. There is an Error message saying that the value is empty. I did a cro…
-
this 'STOPPED' seems to be ELM327 response
https://www.elmelectronics.com/wp-content/uploads/2017/01/ELM327DS.pdf page 89 says we are doing something wrong
-
Sometimes I receive reports where the OBD2 adapter gets recognized successfully, but for some reason the adaptervehicle can't negotiate on a common protocol. I wonder whether there's anything we can d…
-
(apologies for miss-editing this issue when i opened it)
-
See https://racechrono.com/forum/discussion/2039/obd2-splitter for a relevant discussion.
At least on Subaru BRZ / Toyota 86 / Scion FR-S, I was unable to find some PIDs (e.g. ambient temperature, …
-
After install, I ran sudo modprobe bcm2835-v4l2, RoadApplePi was pulling video from the on-board camera for about 45 minutes, then stopped. I added bcm2835-v4l2 to the /etc/modules file and rebooted a…
-
![화면 캡처 2021-02-18 165649](https://user-images.githubusercontent.com/54278490/108323693-4eaafc00-720a-11eb-8fd9-2df1eec88445.png)
i uploaded firmware_v5/can_sniffer/can_sniffer.ino
attatched OBD t…
-
It should be possible to use the BLE Module to bridge the CAN interface to a remote system much like other BLE OBDII adapters. This would eliminate the need for a separate device plugged in and could …