-
With #192 merged we now have a TWAI driver for the ESP32-C3. We should support all remaining devices as well before our next release is published. This can be done all in one swing or with a PR per de…
-
The blocking uart's blocking+async flush only waits until the buffered data is enqueued, NOT until the data is all out on the wire:
https://github.com/embassy-rs/embassy/blob/871d82de7165781ca6164d…
-
Hi, I'am trying to implement firmware update for my **RP Pi Pico W** via Wi-Fi and I ran into a problem.
So I tried to run the boot example from [https://github.com/embassy-rs/embassy/tree/main/examp…
-
I am trying to use SpiDeviceWithConfig https://docs.embassy.dev/embassy-embedded-hal/git/default/shared_bus/asynch/spi/struct.SpiDeviceWithConfig.html
in order to share a spi bus between different de…
-
I'm trying to get the serial usb example working for my STM32F3Discovery board. I'm running the example as is, except I'm omitting the lines
```
// Needed for nucleo-stm32f303ze
let mut dp_pu…
-
Async and blocking currently share some "setup" code. This setup code needs to wait for some things, for example here:
https://github.com/embassy-rs/embassy/blob/a2d4bab2f8a4a9b994bc0289938a9f72595…
-
What does this file embassy @ 9cd0bea do? I'm a newbie and don't quite understand。
-
I'm using SPI to drive some WS2812 RGB LEDs (only using MOSI). On stm32, SPI::write/read calls finish_dma after the transaction, which disables the peripheral. That appears to leave MOSI & CLK floatin…
-
## Environment
* **IntelliJ Rust plugin version:** `0.4.195.5408-231`
* **Rust toolchain version:** any. but using `rustc 1.69.0-nightly (065852def 2023-02-13)`
* **IDE name and version:** CLion …
-
I briefly looked into the source code but failed to find a clear path to add support for new boards (namely Seeedstudio XIAO, which is a tiny SAMD21 based MCU).
Would you like to provide some documen…