-
I see on the ENC28J60 datasheet that Link Status can be read from the physical status registers. The project I'm working on is a network line testing tool, and currently it checks for Hardware Link St…
-
http://ww1.microchip.com/downloads/en/DeviceDoc/80349c.pdf
http://forum.mysensors.org/topic/536/problems-with-enc28j60-losing-connection-freezing-using-uipethernet-or-ethershield-read-this
-
only tested on VMEMega v1a
-
Upverter looks interesting for creating it.
If we used a ATmega32u4(-ish) and a ENC28J60, plus a small PCB, it could even fit in a pretty small package.
-
I have a enc28j60 module (not shield) and want to connect it to arduino mega 2560 and use this library
What pinouts sholud i connect to which pin of arduino?
-
I added this lib to a Ethernet fully running program.
If i add any function of DmxSimple the program not even run in to the setup() function.
Hardware: Nano, ENC28j60 and MAX485
-
ENC26J60 retransmits frames that are between 259 and1076 bytes.
Frames smaller or larger than these limits are not retransmitted.
Found when using TCP and validated with PINGs of varying sizes.
Cou…
-
Hi, I know it is a serial-wifi bridge. Yet I wonder if it is possible to use a LAN8720 ethernet module and create a serial-ethernet bridge?
Is there, or will there be any support for LAN8720?
-
I'm trying to get this running on a WT32-ETH01 has anyone had any luck with this? I get no response on the serial monitor even. I suppose I need to configure the Ethernet pins, but don't know if I am …
-
Hey, i get this error when trying to make the esp_wifi_repeater.
/home/user/esp-open-sdk/xtensa-lx106-elf/bin/../lib/gcc/xtensa-lx106-elf/4.8.5/../../../../xtensa-lx106-elf/bin/ld: build/app.out sect…