-
Since few days ago i don't receive HAN data any more , HAN is red and message "HAN: No HAN data received for at last 30s"
So my question is how to continue fault finding? If its meter or reader that …
-
**To Reproduce**
Like this all the time here.
**Screenshots**
If applicable, add screenshots to help explain your problem.
**Hardware information:**
- Country: Norway
- Meter: Aidon Mode…
-
### Describe the bug
I started converting my config file to the load balancing config.
I am using an SDM630 with a P11 ethernet module but I am now being confronted with the error while afaik the SD…
-
**Describe the bug**
In the dashboard the reader reports that I use the same amount of energy basically every day, which I find somewhat dubious. See screenshot below. The hourly usage seems correct …
-
**Describe your problem**
I have been running the AMS reader for 1 1/2 years now with an ESP 32 and Kamstrup - very stable and fine. And using the Home Assistant discovery payload. Yesterday, I ran i…
-
**Describe the bug**
FW uppgrade from v.2.2.21 to v2.2.18 fails with following error message:
Previous upgrade attempt (v2.2.28) does not match current version (v2.2.21) [0/**-106**]
**To Reprodu…
-
This issue is meant to coordinate the use of the `egondata` user/instance on our server in FL.
We already agreed on starting a clean-run of the dev branch on every Friday. This will (most likely) mak…
-
### Describe the bug
When i use planing in EVCC and mode is in SOL it only start charging with 10 amp and not 16 as i have set to max. Can see plan expect 3700 watt, but orbis charger is only set to…
-
**Describe the bug**
When my WIFI/Internet goes down and comes up again minutes later, the AMS reader struggles to recover from the outage. Today, I did nothing to the AMS reader hardware, like resta…
-
### Describe the bug
Running HAOS addon 0.127.2 with no issues
Upgrade to HAOS addon 0.127.3
Container fails to start with error:
`FATAL 2024/06/25 15:52:23 cannot create vehicle 'ev3': cannot…