-
Using 1.2.2
So at the moment I have these settings for the networking stack and run the app with `-port=12345 -useHttps`. This will now NOT startup an unsecure listener on the same port, this was wor…
-
#### Is your feature request related to a problem?
I prefer to describe the _general_ use case:
- You are using some A/V tool that generates a MPEG-TS stream (FFmepg for example, or any hardware e…
-
I understood that the map is not working for Ubuntu 22.04 (qt < 6.5.0)
```
Qt version < 6.5.0, transmitter map will not be available in TII dialog
```
but I cannot build the devel branch at all:…
-
Hello @rui314,
First thanks for the great linker!
actually wanted to build gcc with lto and bootstrap and faced into a error, i dont know if its configuring, gcc or mold related but here the erro…
-
**Media Info of the file**
```
Playback Info
Player:
Html Video Player
Play method:
Transcoding
Protocol:
http
Stream type:
HLS
Video Info
Player dimensions:
1047x912
Video resolution:
…
-
I asked this on the mlbstreamer, so not sure if this will work on stremglob. Is it possible to specify a tcp port for streamlink. Lets say I wanted to watch two streams at once, the issue of using the…
-
In xTeVe if you select bulk edit and a bunch of channels you can then set them all as an xml file and set as active at once,
via Threadfin only the first selection gets the changes the rest do not.
-
I have 2x6908 and 1x6909x on same server, 6909x get lot of CC errors on multistream channles on 5W, same frequency working without problem with 6908. Driver is latest, convertor is QUAD, mode=0.
…
-
The current remapping that's implemented, while useful and helpful, could be improved. My suggestion is supporting a way that users could have control over the channel numbers (and possibly displayed…
-
Hi
I have two shared tuners 0 and 1. When Master Tuner 0 is busy and I try to tune to a second stream with differend Polarity, then the slave tuner is used. But that is wrong. Here a excerpt from t…