-
keil 倒是可以
这个可以调试 stm arduino 吧
platformio 怎么配置啊
debug_tool = cmsis-dap
upload_protocol = cmsis-dap
upload_speed=1000
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
Hi. I have the TFT35 V2.0 and I wonder if currently it is possible to add a wifi module to it (as I use the SKR 1.3 board I cant add the module there). When I got it several months ago the support was…
-
[`Where to buy?`](https://github.com/Arnold-n/P1P2Serial/raw/main/circuits/P1P2adapter_topside.png)
-
### Basic Info
- [ ] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [ ] I have read the documentation at [readthedocs](https://arduino…
-
I think the ESP8266-based devices' flash is too small (confirm this), but the ESP32 should easily support OTA updates.
So, like, do that.
-
### The problem
One of my particular esphome devices was having consistent problems with entities showing up as "unavailable" in HA (hassos on a pi4-4gb), despite the device appearing to work fine …
-
Hello,
I have a problem when I install the current image, there are problems with writing the Conf file.
Values are not entered or when changed, everything is reset to the first setting.
Someho…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Description:
I have configured several rules based on temperature ranges in Tasmota, expecting them to be m…
-
Self compiled Tasmota version 13.1.0.2 by Arends (because INA3221) is not in default configuration.
When no connection to MQTT configured in Configuration/Configure MQTT then only this line is sh…