-
**Describe the bug**
Light example not building on Ubuntu 22.04, ESP-Matter 1.2 and ESP-IDF 5.2.1
**Environment**
- ESP-Matter Commit Id: f21874cbfba575d5325c7cafe04bfdda491ed962
- ESP-IDF Commi…
-
## Bug description
I have esp-idf v5.2.1 installed as im using that for my main project. I have now tried to make a rust project off the template but that do not build. This is what i get from the …
-
PHY init data is only 128 bytes so using an entire sector is not optimal. We could refactor to include the data as a BLOB in each ROM.
esp-idf does exactly this - see https://docs.espressif.com/pro…
-
### The problem
Using esp-idf framework with esp32_camera causes the camera to fail. I found the solution but I don't know enough to properly implement it. The esp32_camera component hard codes ver…
-
### Board
ESP32-S3-WROOM-1-N8
### Device Description
Custom hardware based on ESP32-S3-WROOM-1-N8 (240Mhz CPU set).
### Hardware Configuration
GPIO 18, 19 allocated to HardwareSerial 1
Onewire B…
-
Using a longer username will cause esphome device to reboot at "D][awox.connection:251]: combine mesh name + password:" step.
[23:06:31]abort() was called at PC 0x402128a3 on core 1
[23:06:31]
…
-
### Board
ESP32 dev module
### Device Description
Development kit
### Hardware Configuration
Development board with nothing attached
### Version
v3.0.0
### IDE Name
Arduino IDE
### Operating…
-
Heyo,
I'm trying to get WebSockets to work with an ESP32 (az-delivery, wroom) and an ENC28J60 module.
Minimal example:
```
#include
#define WEBSOCKETS_NETWORK_TYPE NETWORK_ENC28J60
#inclu…
-
i am using single digit 7 segment display with just 8 connection without decimal point, and single digit does not need digit pin for multiplex, it can be connected directly to 3v3, since 7 segment dis…
-
**Brief:** Can not compile the library with ESP-IDF project.
**ESP-IDF version:** 5.1.1
**LibSSH-ESP32 version**: 3.1.0
**Errors list:**
- LibSSH-ESP32/src/libmbedcrypto.c:196:47: error: 'mbedtls_…