-
Created a minimal project using esp-idf using Arduino as an IDF component following [these instructions](https://docs.espressif.com/projects/arduino-esp32/en/latest/esp-idf_component.html). Using ardu…
-
### The problem
I was running ESP32-CAM on ESPHome with an old version of ESPHome. It was working properly.
I upgraded EPSHome to 2024.7.3, which resulted in EPSHome complaining about my ESP devi…
-
### The problem
Cannot flash firmware on M5 Stack ESP32 (bluetooth proxy). Requires Platform tag, but also fails when including that tag because the online configuration already uses new platform (E…
-
### Answers checklist.
- [X] I have read the [Rainmaker documentation](https://rainmaker.espressif.com/docs/get-started.html) and the issue is not addressed there.
- [X] I have updated my IDF branch …
-
When I turn on the wifi station and wifi AP at the same time in esp32, the newly created thread cannot run. It is tested in multiple versions of firmware. What is the reason?
boot.py:
```pytho…
-
### Board
ESP32 S3 wroom 1
### Device Description
Just an USB port, and a TI battery monitor.
### Hardware Configuration
Currently only working with just the CPU, but has a TI battery m…
-
I am using the following:
- SDK version as supported by https://github.com/espressif/esp-aws-iot/tree/release/202210.01-LTS
- Platform: ESP32
## The problem:
The OTA task consumes about 10kB o…
-
### The problem
OTA updates to an ESP32-C3-mini-1 are failing with the error "ERROR Error Update end: Error: Finishing update failed. See the MQTT/USB logs for more information." and the said devic…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…