-
Running FRR/Zebra (8.1) and GoBGP (3.180.0) on the same host (ubuntu 22.04) with KVM. On the host a VLXAN interface is configured which is connected to a bridge, the bridge is connected to the KVM vir…
-
Hi,all
Does bagpipe-bgp support l3 evpn,which when receive type 2 evpn route, mac route & ip route will be imported separeately according to two different RTs?
-
**Is your feature request related to a problem? Please describe.**
We need the ability to run IPv6 in linknets. Currently it is not possible to add IPv4 addresses in linknets.
**Describe the solu…
-
#### Description
We are unable to get VXLAN (as part of EVPN) to work on our Trident 3 switches. Following the information we can find, we end up with a `syncd` process that is failing to program t…
-
- [x] Did you check if this is a duplicate issue?
- [x] Did you test it on the latest FRRouting/frr master branch?
When creating a VXLAN interface using (for example) ID 100 with an IP address ass…
-
#### Description
#### Steps to reproduce the issue:
1. Configure BGP EVPN VxLAN with one L2VNI
2. Advertise the IMET route from other end
3. See that the learned routes disappear after adv…
-
#### Description
I created a Vxlan EVPN tunnel between 2 sonic switches using the Loopback interfaces as SRC and DST, but it didn't work.
#### Steps to reproduce the issue:
Configure OSPF and…
-
With BGP Unnumbered (RFC 5549) , peering sessions do not require a local or remote address.
Instead, BGP Unnumbered sessions are bound to an interface (point-to-point links).
This is commonly used …
ghost updated
2 years ago
-
There is basically nothing in the user docs on L2VPN or EVPN - there should be intro text as well as command reference.
This is needed in 5.x
-
#### Description
SAI errors setting up tunnel maps in the l3vni case. A purely l2vni setup works. This is running off of the 202106 branch with a couple of local unrelated diffs added. The riot…