-
I have the third Wolf PDB V3 now with the same issue: After a random number of power cycles (10-50 flights for example) the PDB starts and all settings are at the default values (OSD elements, VTX set…
-
This wiki is linked from the product page as official documentation for the Wolf v3, but doesn't contain board diagram / pin out information about that product revision. Could we get permission to inc…
-
On OpenTX 2.3.4 LUA script can't save any parameters besides D Setpoint value. Same script on OpenTX 2.2.* works fine.
-
Unable to reverse motor directions as esc's are not recognized during betaflight passthrough OR Kiss passthrough. I used a Kiss V2 board connected to the Fettec ESC when the betaflight passthrough fai…
-
I have the 4in1 wired to the kiss v2 fc using the traditional wiring harness. After updating the 4in1 from 1.0.29 to 1.0.65 the KISS passthrough no longer works and the fettec configurator cannot dete…
-
`pwmShutdownPulsesForAllMotors` called from `pwmDisableMotors` and `stopPwmAllMotors` directly manipulates CCR register of relevant timer channels through `pwmOutputport_s.ccr`.
https://github.com/be…