-
When printing from Python, the first print works fine, but the second triggers a filament runout on extruder 2 even though that extruder isn't used in the print. (As a workaround, and to confirm it's …
-
It would be nice to be able to use the USB media plugged in to the Prusa Mini as an SD card for use with Octoprint. If nothing else, it seems like it might alleviate issues with https://github.com/pr…
-
# Marlin Firmware - Modified Ender 3 Pro | TinyComputers.io
Marlin Firmware for a modified Creality Ender 3 Pro
[https://tinycomputers.io/posts/marlin-firmware-modified-ender-3-pro.html](https://tin…
-
The manual claims it's possible, but I can't find any connection on the board named `FIL-DET`, or indeed, any `-DET`-type at all. Am I missing something?
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** - [MINI, MK4, XL]
MK3.5
**Printer f…
-
Hello, All options in the program when run manually work like ALL HOME, exstruder, hotend, hotbed etc. When I upload a file for printing, nothing happens and it goes to the resume
![123424496_8085373…
-
Good mornign trying to figure how to setup M25 nad M600 with TFT_LVGL_UI_SPI, but never success.
Looks like it is only possible using Marlin UI.
Still no solution with mks_ui? I encourage you t…
-
Will not compile when FILAMENT_RUNOUT_SENSOR is enabled. I had to manually copy over the FIL_RUNOUT_PIN definition into pins_Ultimaker_2.h from the RC8 source.
-
CXY-V6-191017
Filament Runout Sensor not pausing print when filament runs out (not a critical issue).
Steps: 1. Start print with limited filament
2. Let filament run out
3. Print continues
-
This must be an oversight - MMU_TEST_TRACKING raises the servo after the initial 100mm load before stepping 1mm at a time to verify encoder/filament tracking. The servo should be engaged for the durat…