-
### Issue Description
There are firmware updates available in the Software Center (Vanilla OS 2) for my Thinkpad T480s, but they will not install (even with AC plugged in) during a reboot. BIOS says …
hozza updated
3 weeks ago
-
Update of linux-firmware to v20240513-1 for Qubes OS r4.3, see comments below for details and build status.
From commit: https://github.com/QubesOS/qubes-linux-firmware/commit/79c75cf849df929e3cb4899…
-
Is building the firmware on powershell supposed to work? I get the error that template is not defined on all examples:
`go run .\cmd\zigbee\main.go --config .\examples\factory_reset\zigbee.yaml fi…
-
I've been following the guide and I've finally reached the final firmware upgrade part. I compiled the firmware using the Makefile and altered the update.sh to fit my model as well as alter the privat…
-
I have tried to port spi+NG solution to my board. I use 1.0.3 version,but it does not work.
host side log:
root@myd-y6ull14x14:~# insmod esp32_spi.ko resetpin=44 raw_tp_mode=1
[ 62.261172] esp32…
-
It could be beneficial to split the robot firmware into an interface/planner and a controller. This would give the user a choice for selecting hardware for budgeting etc.
The interface controller c…
-
We finally got an extra ODrive. The plan is we will replace the right side ODrive (that does not work very well) with a new one. Then we will try to update firmware from 0.5.1 to 0.5.6. The firmware u…
-
Reference: https://github.com/tianocore/edk2/tree/master/OvmfPkg/RiscVVirt
Note that EDK 2 support both ACPI and FDT hardware definitions, so existing FDT generation should be fine. Some NVRAM emul…
-
I was able to properly flash the MCU with the latest passthrough firmware. This is my ESPHome config: https://pastebin.com/p22yFTiz
I can capture the original remote successfully, I think:
[13:34:…
-
Root password that exported from the ZyxelRoot.py doesnt work , I have V5.50(ABRV.2)b9 software