-
https://workshop.fomu.im/en/latest/hdl.html says, "Ideally, a USB-to-UART core would be provided for users to instantiate in their HDL designs."
Is this still a desirable goal? I don't have much H…
-
Sphinx (https://www.sphinx-doc.org/en/master/) is the used by a large number of the existing Python and open source EDA ecosystem (for example the [Amaranth's own documentation](https://amaranth-lang.…
-
After the recent dependency bump (#619), I thought that it caused the KWS project to no longer fit on Fomu (over the limit by ~80 LCs). But then I was puzzled that the Fomu CI job was still passing…
-
I'm Try To Run CFU-Playground in Tang Nano 9K, But It's Stucked.
The Command:
```
make load TTY=/dev/ttyUSB1 TARGET=sipeed_tang_nano_9k
```
The Output:
```
/home/minexo79/CodeWorkspace/CFU-Play…
-
I would like to simulate USB devices on the ATSAMD21, up to the point that I can hook the model up to USB/IP and use it from the host. In particular, I'm interested in simulating USB HID devices, but …
-
It would be nice to show how to drive `RGB0PWM` `RGB1PWM` `RGB2PWM` using a clock divider, so achieve the same color cycling effect as the `risc-v` sample.
-
It would be good to support ECP5 hardware like the [OrangeCrab](https://github.com/gregdavill/OrangeCrab) from @GregDavill and potentially other ECP5 hardware in the future.
-
When I try to read the LEDDPWR registers from MicroPython, I don't get the expected values:
```
>>> import fomu
>>> rgb = fomu.rgb()
>>> ADDR_RED_LED_PULSE_WIDTH = 0b0001
>>> ADDR_GREEN_LED_PUL…
-
**Describe the bug**
RNDIS example PR #287 may not work with all ports, following is port that work
- Microchip SAMD
- Nordic nRF52840
- Nuvoton NUC126
- Nuvoton NUC505
- STM32 FSDev
- STM32 (…
-
Hello!
Thank you for this project!
I want to copy .pcf files ([this directory](https://github.com/im-tomu/fomu-workshop/tree/master/pcf)) to another project, to support different types of FOMU b…