-
Hi,
i tested it with an Ultra96-V2 and used the rootfs image.
After boot there is no Ubuntu desktop just a blank black screen.
I will attach the dmesg. Any hint's whats wrong?
Maybe the packed…
-
At last, 1.5years after getting spi-fpga-driver running, I have time to set up my heavy mill with it. It works, but produces a terrible noise when running. There is a lot of inertia in the machine, so…
-
Hello,
I have two more questions and hope to get your support. One is about latency measurement. For example, when I run your bandwidth example, I first try the traditional std::chrono::high_resolu…
-
I switched to a new computer for controlling my CNC machine. Here I wanted to use the integrated Intel HD 2000 graphics card. Prior to this, I had a dedicated GPU because the internal one was causing …
-
make
./testbench
When I finished executing the above command, this problem occurred,
```
Cycling clock to run for a few instructions
6000: Illegal instruction (core 0) at PC 0x00000000…
-
Post here ideas with affordable cameras, image sensors, lenses, image processing boards, to build an open source large scale deployable smart camera.
We need to test a lot of options, eBay, Aliexpr…
-
# Prerequisites
Please answer the following questions for yourself before submitting an issue.
- [ ] I am running the latest code. Development is very rapid so there are no tagged versions as of…
-
The [Heterogeneous parallel programming with open standards using oneAPI and Data Parallel C++](https://www.w3.org/2020/06/machine-learning-workshop/talks/heterogeneous_parallel_programming_with_open_…
-
Hi all,
For dual-port FPGA boards, is it possible to support bump-in-wire based on the project?
Thanks,
Yang
-
```
# cd /lib/firmware; echo system_top.bit.bin > /sys/class/fpga_manager/fpga0/firmware
# echo 79024000.cf-ad9361-dds-core-lpc > /sys/bus/platform/drivers/cf_axi_dds/unbind
# echo 79020000.cf-ad93…