-
lt. Community sollen Meldungen die sich aus der Umstellung des js-controller auf die Version 3.3.4 ergeben bei den entsprechenden Adaptern gemeldet werden.
Der Adapter funktioniert Augenscheinlich …
-
When trying to add an integration, the process takes a very long time and finally ends with an error: Failed to load configuration interface: Unknown error
## Version of the custom_component
0.2.1…
-
In the Homey Energy overview, my Fronius smartmeters appears with negative values for current powerr. As a result, its consumption is not accurately accounted for. How can I address this issue or adju…
-
As I am having an West/East System installed, devided on the 2 MPPT's it would be helpful to have the actual AC Power per MPPT as states.
The information is already in the System, if you press on the…
MNEWI updated
3 months ago
-
Hi @aukedejong and a big thank you for that!
The plugin work very well, but, at night, i have errors like that, every 30s
2021-04-10 07:21:24.184 Error: (Mon onduleur) 'onHeartbeat' failed 'KeyErro…
-
### The problem
As per https://github.com/home-assistant/developers.home-assistant/pull/1512, `gold` and `platinum` integrations should implement diagnostic.
I discovered via #117565 that the fo…
-
Hello,
will it be possible to read the values (power, temp) of the connected fronius ohmpilot values?
KR Matthias
-
### The problem
After Update my Fronius Inverter Symo Gen24 to the latest Firmware 1.32.5-1 the Device Ohmpilot is no longer available in the Fronius Integration.
### What version of Home Assist…
-
## Reducing D-Bus traffic - increasing scalability
For example a solar charger, sends multiple PropertiesChanged signals every second, one for each D-Bus path. Also cgwacs and dbus-fronius do: 9 si…
-
If I run the script manually via service/run there isn't any problem (see attached picture).
If it runs automatically after reboot it works for around 10 minutes and the values will not update anymor…