-
i use venus v2.92 large on a raspberry pi 2.
is it right that the directory "/data/dbus-iobroker-smartmeter" does not exists?
i created it an do the install.sh but there is no reaction. so i did it …
-
### The problem
If Home Assistant is restarted during a period when the inverter does not produce any power, its entity is shown as unavailable and it is staying unavailable, even when solar producti…
-
Hallo,
gestern ist mein altes Fronius Smartmeter v63 gegen ein neues v65 ausgetauscht worden, beim alten hatte ich immer diese Datenpunkte:
![1](https://user-images.githubusercontent.com/69574329/…
-
When my battery is empty, my Multiplus turmes off to reduce standby Power usage.
When this is the case, vrm Stopps showing grid measurements with this plugin.
Older (other) plugin kept sending value…
-
### Describe the bug
Hallo zusammen,
nach einigen Ladevorgängen habe ich eine falsch berechnete Gesamtladung in der Historie, als auch auf dem Startscreen unten links:
![Screenshot_20240315-20004…
-
Die Modus Geräte ID der Gen24 Geräte ist die 200 bei den Snapin Invertern die 240. Hier wäre eine Konfiguration wünschenswert
Siehe Seite 13 [https://www.fronius.com/~/downloads/Solar%20Energy/Operat…
-
Hallo,
ich hab zwar unter der Erzeugung einen Datenpunkt PV_Power der auch einen Wert liefert, allerdings ist die Flussrichtung weder zum Verbrauch noch zum Netz ersichtlich. Wenn ich die Verbrauch…
-
Combined entities when a flow is positive/negative are not treated as inward/outward flows on flow-card respectively.
Negative flow on grid should show feed in from either battery or solar but it s…
-
### Describe the bug
After updating evcc from 0.119.3 to 0.119.5 add-on doesn't start in HA, with the following log:
```
Using config file: /config/evcc.yaml
starting evcc: 'EVCC_DATABASE_DSN=/d…
-
Hi,
I am new to github and not familiar with python nor programming. I ran FroniusSmartmeter service installed through setup helper over 2 months without problem. After updating to venus 2.93 servi…