-
**Description:**
While prints initiated from OctoPrint, the display shown no progress of the print, but only the home screen (plus temps, nozzle height, speed ratio and material).
**Feature reques…
-
I am planning on turning over the source of an application to Synthoes that runs a milling machine using TinyG, however there are two issues that I really think need to be addressed before I can do th…
-
**Issue by [luminize](https://github.com/luminize)**
_Mon May 19 06:42:37 2014_
_Originally opened as https://github.com/machinekit/machinekit/issues/193_
----
In these two thread is some discussio…
-
This issue was discovered in https://github.com/machinekit/machinekit/issues/1123#issuecomment-282989556.
Never actually fixed as it seemed to rely upon an extreme use of halcmd to encounter it.
…
-
I need to run multiple curl commands on the power on and power off events.
For this I create two simple shell scripts ( `#!/bin/sh` ) that lists each curl command needed.
Script for turning on:
…
-
Besides some way to load other modules written in gravity, i would suggest implementing the functionality to load native libraries as modules too.
For example ``module "test"`` would load ``test.gr…
-
Gui freezes, needs to be fixed with non blocking QProcess and asynchronous event handing.
See: https://github.com/koppi/gcoder/blob/master/mainwin.cpp#L121-L123
koppi updated
8 years ago
-
hi, i try to send simple gcode to new board skrv1.3
`from printrun.printcore import printcore
from printrun import gcoder
import os
import sys
import time
p = printcore()
p.connect('COM19',…
-
When using the avoid crossing perimeters feature I always get lost steps when using my standard travel speed of 300 mm/s with an acceleration of 1000 mm/s^2.
To avoid this I have to reduce my travel s…
-
Let's continue the discussion with @coddingtonbear from #685,
we have Travis working in bCNC project. What are the possibilities? I want to implement following:
- automatic .exe build using travis…