-
I tried this one and flashrom couldn't even communicate with the programmer -- I think its pio related (not sure entirely, I later tried in my own implementation the pio but couldn't get it to work e…
-
Per user report from https://community.platformio.org/t/sipeed-rv-debugger-lite/19784.
The Lite version seems to be very close to the normal version listed at https://docs.platformio.org/en/latest/…
-
This project will need substantial rewrite. The wireless project also?
The processing seems to use single thread, one dispatch loop that polls RTC and every 100ms or so polls UART data; every 20ms or…
-
When I try and compile code using hardware floating point I get a HardFault exception on the first instruction that tries it execute a floating point instruction. The fault indicated is NOCP despite h…
-
Using ESP8266 as programmer, compiles good. I can read and verify data.
I can enter commands manually, but that's not working. Client program also dosen't work, instantly returns "Could not write p…
-
Hi everyone, I would like to address a very recent issue popping up at multiple places related to the BOOT0 Pin in the STM32G0 series devices. See:
- https://github.com/Esoterical/voron_canbus/tree/m…
skuep updated
11 months ago
-
I can contribute, need somebody give me some ideas where to start.
I already PlatformIO projects works for GD32VF series. Just want to unified to a single opensource and active platform.
-
- Holtek HT32F1654 (Cortex-M3)
- GigaDevice 25Q40CT
- 3x Macroblock MBIA043GP (1 per channel)
CN2 header:
- pin 1: 3v3
- pin 2: SWDIO
- pin 3: SWCLK
- pin 4: nRST
- pin 5: GND
SEL1 header…
-
I see good use for KSZ8863 driver. Similar driver for RTL8306MB would be nice because it is low cost and available and supports 100BASE-FX. Lot of 10/100M media converters use this chip. I see good u…
-
@WifWaf I am interested in downloading the firmware using a ST-Link v2.
I found the SWD ports on the schematics at https://revspace.nl/MH-Z19B
4. Firmware
MCU firmware can be easily dumped through …