-
I was writing to suggest a feature that would allow for a new folder of videos to be played in random order when GPIO is pressed. If there is a way to modify the code to make that work then I would ap…
-
## Rules
1. Post your code
2. Post a picture of the problem and describe what you expect to see
3. Run the pattern test and post the result as gif/video (need to have a bit more than one full RED/…
-
I've had PiKVM working nicely with an Ezcoo EZ-SW41HA-KVMU3P but today I updated to ver 4.2 and the switching options on the GPIO menu no longer work. I've tried rebooting PiKVM with no effect.
-
Hi, I would like to make this work on ESP32. I was able to get it compiled but I am not sure of GPIO vs RS485 and pentair controller.
ESP32 GPIO 45, 46 as RX/TX
45 to 485 TXD
46 to 485 RXD
R…
-
**Describe the issue**
Using LVGL Lottie with ESP32-S3 Touch LCD 1.28 plays about 1/4 of lottie and then crashes out without any guru meditation error.
**Code to reproduce the issue**
static …
-
### Summary
Which Arduino Nano Matter GPIOs are interrupt-capable?
The https://docs.arduino.cc/resources/pinouts/ABX00112-full-pinout.pdf does not provide this information.
Thank you!
-
**Describe the bug**
Using PinNumberingScheme.Board seems broken. I had a problem when writing a BoagleBoard driver, and looked at the RaspberryPi driver to see how it was handled there. It seems t…
-
### Describe the bug
/home/qiao/Arduino/libraries/M5StickC-Plus/src/utility/Speaker.cpp: In member function 'void SPEAKER::begin()':
/home/qiao/Arduino/libraries/M5StickC-Plus/src/utility/Speaker.cp…
-
I'm unable to start a SX130X as concentrator under kernel 6.6.22 on a Pi 4B.
Running reset_lgw.sh, outputs:
`./reset_lgw.sh: 26: echo: echo: I/O error
./reset_lgw.sh: 27: echo: echo: I/O error
./r…
-
For my project we have a relay hat on the pi that is controlled by python code.
I use it with a pi4 and a pi5. If i install the INA260 library on the pi4 everything is fine.
if I install the IN…