-
ssd 1327 is cutting the second line of simple text. I have tried several constructors.
Link to what I bought.
https://www.amazon.com/gp/product/B07FHLFQWB/ref=ppx_yo_dt_b_asin_title_o08__o00_s00…
-
Hi,
I am working with a SEEED OLED Display 1.12" V2.2 128x128 with the SH1107 driver. I followed [#501](https://github.com/olikraus/u8g2/issues/501) and was able to get my OLED display working with …
-
I thing something is wrong with my_user_config.h because with the latest release version I can't use WiFi Smart Config (I use it without problems on versions 5.x.x)
- [x] _Searched the problem in i…
-
### Hardware:
Board: D-duino-32
Core Installation/update date: 17/dec/2017
IDE name: Arduino IDE 1.8.5
Flash Frequency: 80Mhz
Upload Speed: 115200
### Description:
The…
srolf updated
5 years ago
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
Hej, I've installed/tested several versions from GitHub and am finally running Tasmota with v6.1.1c. I nearly deactivated all packages beside web-server, MQTT and ws2812b support as I want to switch o…
-
Activate a mode where data is sent every 10 seconds for faster diagnosis of problems.
-
Hi,
I've just received my MKR Zero in the mail and followed the installation guide.
However, when I ran the Hello World program, '????' showed up instead of '你好世界'.
At first, I expected this: my Me…
-
請幫忙實作四個 Grove Sensor (在 starter kit 內的)
- Ultrasonic Ranger
- T&H Sensor
- LED Bar
- OLED Display
其他 Alpha 版本內未測過的功能, 正式 release 都先關掉
詳細 spec 用郵件寄出, 有任何不清楚地請找我討論.
-
Hi All,
I am using two seeed Gray Oled display and Arduino Mega - Grove Shield - I2C port to show different messages in each display. Those display only have one address 0x3C. Using I2C port, the …