-
Hi, i tested the 2.5.4 opi image in my opi zero 3 but without success, after load bettercap the system start an loop in this screen.
] Proxying via [REDACTED]
…
-
Is there any difference between the build for H616 (Zero 2) and H618 (Zero 3)?
-
Hello everyone. A noob here. Searching the internet I found this repo.
Here in this …
-
this gpio pinout
board doc: https://drive.google.com/drive/folders/1pZ4X4u…
-
Datový model pro ukládání informací o budovách.
Předpoklad:
Adresa
Kódové označení (Š101, H618, H59, MB5/6
Učebny
(atd.)
-
Just to let you know: I did recently some research on Allwinner SIDs and as a former [linux-sunxi guy](https://linux-sunxi.org/index.php?title=Special:Contributions/Tkaiser&offset=&limit=500&target=Tk…
-
After working with this u-boot repository with my Orange Pi Zero 3 (and other boards) for some time through the Orange Pi build tool, I am now attempting to move the build scripts to using the mainlin…
-
hello,
first a very big thank you for all your efforts to get new hardware running (h313/h616/h618/rk2566/rk3528 tv boxes for instance)!
it looks like you are using a fixed voltage for the cpu r…
-
### What happened?
dear @chraac,
I'm testing orangepizero2w builds and it seems that ethernet PHY is not getting powered, output dmesg:
```
[ 2.119267] dwmac-sun8i 5020000.ethernet: IRQ eth_w…