-
I already tried an other integration for my biowin 2 touch (march 2022), but no luck for me. same situation wich this new integration.
![image](https://github.com/vermi0ffh/ha-windhager/assets/7942…
-
Because of the Tesla API limitations I am not able to control AC / car heater from home assistant through cloud API. Used to work in hacs tesla custom integration but does not work anymore. New Tesla …
-
I finally got the "Service" user and password to try out this integration for my windhager pelletburner.
It does log in and starts setting up sensors with proper names but getting data seem to fail…
-
I'm running RatRig V-Core4 500 with a Orbitool board. I keep getting lost communication error. I've tried multiple toolboards, USB pcbs, and cables. I ordered 3 toolboards, so I had 1 for IDEX an…
-
I think this would be a clean way to have curve control for the bed fans if you're already using the chamber_temp sensor for your PTC heater. As of now, a sensor pin needs to be defined for [temperatu…
-
For verify_heater / verify_extruder, whats the reason to change so far from Klipper defaults?
-
### TFT Version
_No response_
### Firmware Version
_No response_
### Blueprint Version
_No response_
### Panel Model
None
### What is the bug?
I have configured the NSpanel …
-
Here is the requested device info:
```
{"device" : "5B: 0A:60:74:F4: 1A:A8:90", "deviceName": "Smart Space Heater"
"model
": "H713B"
"httpInfo": {"groupId": 0,"device" : "5B: 0A:60:74 :F4:1A:…
-
First off, great work!
Do you know if it is possible to turn on the heater or perhaps enable AC with some temperature?
-
When switching the thermostat from 'off' to 'heat' the switch isn't immediately being turned on despite a high enough PID output.
According to the log the cycle time is too short, but with an o…