-
The CZ-TAW1 module was connected to the Aquarea Smart Cloud and stopped working sometime in the fall/winter. The "Status" indicator started flashing red. After rebooting the module it works for a whil…
-
**Issue:**
I'm very new to HeishaMon but have already seen a number of issues that seem caused from a lack of understanding HeishaMon's architecture, design goals and limitations.
**Proposal:**
…
-
The firmware update description in the readme is pretty short ;)
Just to be sure: To get the correct binaries (currently 3.8), download `source.zip` from [here](https://github.com/Egyras/HeishaMon/…
-
Hello, i'm playing a bit with the Mitsubishi installation in our business unit.
I successfully connected the D1 Mini using esphome and the esphome-mitsubishiheatpump library.
Now i'm trying to con…
L4ky updated
2 months ago
-
Last night I was able to test my new ruleset for clock extension due to the low temperatures. Unfortunately there was a problem and the rules no longer worked in the morning. I recorded the data on th…
-
I wanted to ask a question.
Do you know if I change my Heishamon unit for another, for example put in one of the new large units... do I have to reconfigure all the Home Assistant entities again? …
-
I apologize, if this text goes to somewhat wrong place, but I could not find a better one, not least because of the fact that I'm quite unexperienced Github user and not a sw professional. Last time w…
-
I have the Panasonic INET module and the large Heishamon running in parallel.
I get all the data.
I can control via the Panasonic Cloud.
Heishamon reliably provides me with all the data.
B…
-
Hi, I have a board marked "Heishamon OT v1.3". I mistakenly uploaded the wrong firmware ('large', when it should have been 'small'), and now the Heishamon no longer responds. I am now trying to fact…
-
Hi,
I'm facing an issue that my HomeAssistant mqtt broker gets the messages from CZ-TAW1 but HAAutoDiscovery does not work properly, only value messages are posted to mqtt, no configuration messages …