-
### Checklist
- [X] The problem is not listed in the [hardware support matrix](https://github.com/ilya-zlobintsev/LACT?tab=readme-ov-file#hardware-support) as a known limitation
- [X] I've included a…
-
fan2go is unable to set the fan speed on my system
fancontrol and coolercontrol can do so just fine, enabling the corresponding services one-at-a-time.
But when I do `sudo systemctl start fan2go`,…
-
I think it has issues accessing the fan control which causes unexpected behavior when exporting it.
Log below:
```
1 AMD GPU(s) found. Checking if correct kernel driver is used for this/these.
0…
-
Hello and thank you for this wonderful project.
In my case I use it for my Raspberry Pi 4 with a USB M.2 SSD adapter.
Unfortunately, the hard drive in my setup seems to get quite hot, so I would b…
-
## CVE-2023-1855 - Medium Severity Vulnerability
Vulnerable Library - linux-yoctov5.4.51
Yocto Linux Embedded kernel
Library home page: https://git.yoctoproject.org/git/linux-yocto
Found in HEAD co…
-
drivers/hwmon/applesmc.c: In function ‘applesmc_init_smcreg_try’:
drivers/hwmon/applesmc.c:829:34: error: ‘smcreg’ undeclared (first use in this function)
829 | struct applesmc_registers *s = &sm…
-
Hi, I installed the tool but it looks like it has no effect on the fan speed. The fan speed is 0 if the CPU is cooler than 70 degrees and I cannot change it with any tool. Secure boot is disabled. Sho…
-
I am using a Lenovo ThinkPad T420. I wish to use the temp file at
```
/sys/devices/virtual/thermal/thermal_zone0/hwmonX/temp_1input
```
where `hwmonX` fluctuates between boots, which means I can…
ceaum updated
2 years ago
-
this is happening because mapping is done in container.
Solution could be to export the mapping.
-
### Describe the bug
The status plugin for GPU usage doesn't process AMD and intel GPUs
### To Reproduce
Steps to reproduce the behavior:
1. Have something other than an Nvidia GPU
2. Add `gpu-…