-
Hi, a quick question please.
I open the FTDI serial port like so:
port = pyftdi.serialext.serial_for_url('ftdi:///1', baudrate=8600000, timeout=2)
And 'next allowed' as per console output is 87…
-
Hi,
I'm happy with my new Hydrabus. Lot of protocol supported and such a nice documentation around.
But today, i was working on i2c related stuff and got a weird bug.
When i was running the sc…
-
Hi,
After checking the pdf I have found the following errors:
- Page 8: P4wnP1 A.L.O.A. instead of P0wnP1 ALOHA
- Page 12: there is no description of RockPro64, the one provided is from 0DROID …
-
When entering BBIO_UART_BRIDGE, it is not possible to send any byte to the target.
I use this script:
```
import serial
ser = serial.Serial('/dev/hydrabus', 115200)
for i in xrange(20):
…
-
I'm trying to implement a baurate.py like script for using it with hydrabus.
When I'm trying to change the baurate speed, I first stop echo UART UX, change the baudrate value and then activate again …
-
The "echo UART RX" features seems not working, no output is return.
I using the script provided on the documentation to be sure.
By using the bridge mode, the output are correct.
-
The communication seems to be broken using the HydraFW version 0.9 beta.
![2019-02-19 14_26_44-hydratool v0 3 1 0 - 16 june 2017 based on qt5 10 1](https://user-images.githubusercontent.com/670849…
-
With the latest firmware compiled from the Master Branch, the brute bypass & idcode scan reboot the target device.
-
Hello,
When trying to play the [smartcard_bbio.py](../blob/master/contrib/bbio_smartcard/smartcard_bbio.py) script, it fails with the error "Cannot set smartcard mode, try again or reset hydrabus.…
-
hi,
after setting hydrabus in DFU mode (holding UBTN)
I am trying to install the WIN7 x64 driver from STMicroelectronics STSW-STM32080.
driver : STM Device in DFU Mode
I always get :
the …