-
```
import os
from pypcie import Device
# Bind to PCI device at "0000:03:00.0"
d = Device("0000:00:02.0")
# Access BAR 0
bar = d.bar[0]
# write 0xdeadbeef to BAR 0, offset 0x1000
bar.wri…
-
Hello, let me first start off by typing, your work is highly appreciated! thank you one million.
This may be a rookie question but how is the i2C address of the IC changed? I see on the tech datas…
-
### SOC
ESP32
### Lora IC
[SX1276](https://www.semtech.com/products/wireless-rf/lora-connect/sx1276#documentation)
### Product Link
https://shop.m5stack.com/products/lora-module-868mhz-…
lboue updated
3 weeks ago
-
I am trying to use an I2C device (pixycam2) on a brickpi3 using ev3dev stretch.
I am seeing a weird bevahior: when I set an input port mode to nxt-i2c, the motor (medium motor) does not run anymore…
-
The current i2c_slave driver API is marked experimental and is generally undocumented. It is also unsuitable for DMA-based solutions like [Nordic SPIS](https://github.com/zephyrproject-rtos/zephyr/is…
-
## Environment
- Audio development kit: ESP32-LyraT-Mini
- Audio kit version (for ESP32-LyraT/ESP32-LyraT-Mini/ESP32-S3-Korvo-2): v1
- [Required] Module or chip used: ESP32-WROVER-E
- [Re…
-
Just now I'm working on easy project which shall read some data from I2C bus and provide the results on display (also connected via I2C). There is two example related to I2C but one is concerned to ha…
-
Hello, i got an waveshare MCP2307 with 0x27 address.
I try to find it on my RPi 4, with Raspbian OS, when I use i2cdetect -y 1, I found it with 0x27 adress.
But, on my HomeAssistant Supervised i…
-
FTC Added a new device to the official hardware library, the OctoQuad, which our team is currently using in i2c mode. When attempting to add compatability between the octoquad and roadrunner, we had c…
-
Hi, I am using a setup similar to what is described in the README with raspi-io on the remote device. When I try to ead an i2c device I get multiple `READ not implemented yet` messages and finally it …