-
**Description:** When attempting to pull system details on a Mellanox/Nvidia SN2700 utilizing the "show platform" commands the results are either outright errors or display incorrect information. Thi…
-
board_id(){
EEPROM_DEVICE=/sys/bus/i2c/devices/0-0050/eeprom
board_id=`dd bs=12 skip=7 count=1 if=$EEPROM_DEVICE 2>/dev/null`
}
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I had download the new bug fix and add the external EPPROM and some lines in the end of confi…
-
The `.reset()` method is not working properly: it fails to restore the DAC registers to the EEPROM-saved values. Sending the bytes directly on the I2C bus works.
Code example demonstrating this behav…
-
See the existing i2c bit banging stuff in qemu.
* Needed for Opsis EEPROM
* TOFE EEPROM
* HDMI output EDID
* Other?
-
I am using the SDK version `1.1.15` for our data collector (this should be identical to our current dev), and I occasionally get this error. I run the data collector, start up an ADC read, and everyth…
-
**Describe the problem you have/What new integration you would like**
Support for external storage like MB85RC256V instead of internal flash.
**Please describe your use case for this integra…
-
According to DIOT_system_specification_v2.0 servmod should be driven high to attach EEPROM to the shared I2C bus (currently system board has to drive low because of T18).
Second issue is lack of p…
-
Currently, no error handling exists for communications between the Yocto's EEPROM and micro. This means that if the ATMEGA1284 gets an unexpected NAK from the EEPROM, or if the ATMEGA1284 receives few…
-
Since this is a drop-in replacement for libudev/libeudev, should I purge libudev/libeudev before installing this on the system?
The problem is that Devuan seems to heavily depend on libeudev, and p…