-
Does anyone have any guides to wiring a bare ili9341 40pin display direct to a raspberry pi. I managed to get a display briefly but then it blanks to white.
-
#### Type of Raspberry Pi
Raspberry Pi 3 Model B v1.2
#### Linux Kernel version
Linux raspberrypi 5.4.51-v7+ #1333 SMP Mon Aug 10 16:45:19 BST 2020 armv7l GNU/Linux
#### Other versions
…
-
Just curious, I was wondering if there is any possible way to control the brightness of a ili9341 screen either from software or using a potentiometer?
Thanks.
-
I stumbled about this project while trying to get a 2.2" inch display running on a `RPI3 B+` using a recent raspbian release .
The display is connected without a HAT using wires and the pinouts descr…
-
Thank you for the great work with this firmware.
I've just flashed it on my scope and I noticed a weird behavior where the red and blue color channels seems to be swapped. Nothing too fancy and (prob…
-
Hi to All
I am testing both Adafruit_ILI9341 and TFT_ ILI9341 libraries for Arduino UNO (ATMega328), Leonardo (ATMega32u4) and Optiboot (avr128db48) MCUs modifying Adafruit grapic test and got foll…
-
Hi Melissa,
Have you done something following my comment (see below) posted a few days ago? Thank you for you help. Regards, RJM
=============
I read and understood the protocol used in the init …
-
i had wired up my ili9341 correctly but the screen isnt working and everything is black (no backlight on)
the CLI is working but not the screen.
pls need help asap
-
- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE**
Feather M4 Express
- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO
VERSION HERE**
1.8.9
- List the st…
-
Did not work with default settings. The following works:
```
// ** Set the correct configuration for ESP32-WROVER-KIT v3
// --------------------------------------------------------
//#define DE…