-
I've just purchased a ["Bell J1" doorbell](https://www.amazon.co.uk/gp/product/B08GCG14G7/) with the hope of obtaining access to an RTSP stream, via a modified ppsapp. However it doesn't have a 2.x or…
-
Installed openIPC on my camera([Xiaomi MJSXJ03HL) but I am unable to access SD card.
I have tried gpio clear 54 procedure as well as rebooting with and without SD card inserted.
In dmesg output …
-
Hi guino,
I have a new cam which responds to the ppsFactoryTool.txt
I have soldered uart, here is what happens on start:
```U-Boot SPL 2013.07 (May 17 2023 - 19:30:08)
U-Boot SPL 2013.07 (May 17…
-
https://github.com/gtxaspec/u-boot-ingenic/blob/8a2464e6b221f808ca64a65a3ef711b1f342d061/drivers/spi/jz_sfc_nor.c#L1083
-
Hello,
I already posted this issue in majectic but I think this is most due to firmware part.
(see [https://github.com/OpenIPC/majestic/issues/133](url))
With :
Camera board id: t31n (t31 family)…
-
It's unclear from the `README.md` whether WyzeHacks is expected to work for v1 cameras; "v1" is mentioned only for the uninstall instructions.
I tried using the SD card install approach, and I hear…
-
I see it's CR4CU220812S11_ota_img_V1.3.2.1.img is 7zip archive, what is the password for it?
-
Hello all,
First of all thanks for your great stuff.
I followed the tutorial with a new mjsxj03hl and UART install and it worked.
Some details in the tutorial is nto up to date but minor things (na…
-
Currently 'option' button acts as 'home/back' and 'home/back' button act as 'option'. These should be swapped. Thanks.
-
Given it is a proc macro, we could take normal strings for the fields and ensure they are ASCII if/where needed.
This would make the interface a bit leaner.
For `author`, it would be particularl…