-
### Is your feature request related to a problem? Please describe.
The ESXI-70-000054 control is only marked as NA if there are no iSCSI HBAs present.
Many systems have NICs which provide hardware…
-
I setup the gwcli following http://docs.ceph.com/docs/master/rbd/iscsi-target-cli/
And when I executed "gwcli ls" command on top dir, this issue happened, is this a bug?
[root@gw1 iscsi]# gwcli l…
-
**Describe the bug**
OS boot fails with below error while using IBFT in kernel command line. "netroot=iscsi" dracut is expecting ip address for target discovery from "netroot=" parameter even thou…
-
### Board
WT-ETH01
### Device Description
This is a regular esp32 with an ethernet-port bolted on.
### Hardware Configuration
There's an SD-Card reader attached to pins
```
#define …
-
Hello,
Version:
VirtualBox version: 7.0
I created iscsi target from this guildeline: h…
-
Building against master...
The doc says:
[[
The src directory contains a handful of useful iSCSI utilities such as logging in
to and enumerating all targets on a portal and all devices of a targ…
-
# cat /etc/tgt/targets.conf
default-driver iscsi
bs-type sheepdog
backing-store tcp:127.0.0.1:7000:usun
but tgt-admin throws:
# tgt-admin -p -e
# Adding target: iqn.backup.sheep:us…
-
Hi, i have a problem and don't find a reason for it nor a solution, I need help.
I try to make it short as possible.
# Environment:
* XenServer Pool with 3 servers, multipathing enabled on each o…
-
Hello, i can not create a target, the python fouls and gwcli crashes out
```
[root@ceph1 ~]# gwcli
/iscsi-target> create iqn.1998-01.com.mycompany:myserver
IOError: [Errno 22] Invalid argument
…
-
1、 I install glusterfs-6.0-63 and tcmu-runner=1.5.4 on rocky 8.9 system
2、Config ”user:glfs“ lun , and map lun to a target
```
[root@r01 ~]# targetcli ls
o- / .........................…