-
```
cf http://www.libnfc.org/community/post/4702
I tried this code:
nfc_target ant[1];
nfc_modulation nm = {
.nmt = NMT_ISO14443B2SR,
.nbr = NBR_106
};
nfc_initiator_list_passive_ta…
-
```
cf http://www.libnfc.org/community/post/4702
I tried this code:
nfc_target ant[1];
nfc_modulation nm = {
.nmt = NMT_ISO14443B2SR,
.nbr = NBR_106
};
nfc_initiator_list_passive_ta…
-
PN532支持确实不错,但是对于老牌读卡器ACR122U支持却不完美,响应慢是常事。ACR122U可是以快速的读写卡为招牌~~~
-
When reading the CHUID, it's often not necessary to grab the entire data structure if pre-enrollment has occurred.
SP 800-73-4 Appendix A states "For each container, compliant cards shall return al…
-
Hi,
I apologize in advance for posting this here, there just does not seem to be a forum dedicated to rfidiot.
I'm starting a project for an NFC toolkit GUI based on rfidiot, but I cannot seem to ma…
-
Hello,
I've got a rfid board PN532 connected to the I2C bus via the groove board and directly to the GPIO ping 3 and 5. Here's what I was able to get to so far:
Connected directly to I2C:
**nfc-s…
-
Hi! Thank you for this awesome project, I've been tinkering with it for a while on my RPi and it had been awesome. It works great on my MIFARE cards.
Recently I decided to develop an android app to…
-
```
Hi, i have a Problem with libnfc and a mifare classic 1k card:
System:
Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
root@debian:~/mfcuk-read-only# nfc-list
nfc-list uses …
-
-
```
cf http://www.libnfc.org/community/post/4702
I tried this code:
nfc_target ant[1];
nfc_modulation nm = {
.nmt = NMT_ISO14443B2SR,
.nbr = NBR_106
};
nfc_initiator_list_passive_ta…