-
Hi,
for all of you which are using this great "integration" for Modbus TCP into HA and also would like to use the EVCC addon.
I wrote some MQTT and EVCC configurations for that you do not have …
-
Just got a Sungrow SG10RT installed and my `config.py` looks like this:
```
inverter_ip = "192.168.1.120"
inverter_port = 502
slave = 0x01
model = "sungrow-sg10rt"
timeout = 3
scan_interval =…
-
Not sure what's wrong with this setup.
Maybe someone has ideas.
![Screenshot_2023-10-07-12-41-53-18_c3a231c25ed346e59462e84656a70e50.jpg](https://github.com/mkaiser/Sung…
-
Hey together,
i noticed the addon crashing since this morning. The log shows an thrown 'er_invalid_appkey' error:
```shell
Error: appkey is incorrect 'er_invalid_appkey'
```
Is there a way to…
-
Have added the repo, set all the config with my sungrow account, then i hit start. It seems to start, but I cannot see any devices. Then it seems to stop all by itself a few minutes later, no obvious…
-
Hi, I have logger 4000 and the firmware was corrupted , I cant access the through web interface or from isolarcloud. Can i update the firmware through microSD card. Help and suggestions needed..
-
I've noticed that when I initially connect modbus4mqtt on my SG-5K-D, I get a readout for all the registers, and unless I've got a register in there that is wrong, no errors. As it keeps running thou…
-
Hi I'm having an issue to read values from an SG40CX. I don't know if I should paste here but just be sure, this is my output on pastebin : https://pastebin.com/SqD1Ep3p
It seems to be reading some…
-
Hi,
I've looking for SH5K-V13_V47.zip or SH5K-V13_V48.zip.
It's for the oldest SH5K, before the SH5K-20 and SH5K-30. It is no longer on iSolarCloud because it's no longer supported but I have an S…
-
I've just had a SH10RS and battery installed and am finding there's a number of quirks that look like this particular (very new) inverter isn't fully supported by the current integrtion.
First of …