-
**Describe the bug**
We are transmitting SSTV in Martin 2 mode from an SX1268. This works as expected on frequencies below 432 MHz. Changing the frequency to anything above 432 MHz (tested up to 437 …
-
Hi,
I'm testing this with a LoRa32 TTGO board, using DIO0 as the RX callback. The firmware also uses the SPI sdcard driver.
```
0;32mI (741) gpio: GPIO[26]| InputEn: 1| OutputEn: 0| OpenDrain: …
ghost updated
2 years ago
-
### Category
Other
### Hardware
Other
### Firmware Version
v2.5.0.ab7de7f and 2.4.x
### Description
**Device under test**
Heltect HT-CT62 but other ESP32 device seem to be aff…
dm5tt updated
10 hours ago
-
I'm working on a SAMD21 based USB device, which does the USB work in the USB ISR, along the lines of the usb_echo example. The USB interrupt is set to a lower priority (higher number) than another in…
-
I found which changes are needed to get this working on the ESP32 version of ESPEASY, and thought you would like to know too.
First you need to enable SPI in the GUI as HSPI, so with pins 14/12/13.…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
https://github.com/alve89/ard_nrf24l01_garagedoor_opener/blob/a2d873e61c7d58c35cfa0d6ecb32ccda5598507b/code/231020_Stationary_Device/231020_Stationary_Device.ino#L1000-L1003
---
###### This issue wa…
-
Hi!
I'm working on a project on the Gapuino board v2 which requires real-time data processing. I manage to do just that using freeRTOS by using an ISR (connected to the gpio pin where the data ready…
-
It should be useful to integrate the "pulse" functions of Circuitpython and the infrared driver, with these functions it's possible to read and send IR codes with a GPIO pin for example. These functio…
-
### The problem
I have an energy meter which blinks light for 200ms for every Watt consumed. I have a light sensor on that light and connected to WeMos D1 Mini with ESP8266 GPIO12. The light sensor i…