-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to the bottom right in VSC and pick a board
2. Click on ``````
…
-
- Arduino board: Grand Central M4 Express
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.19
- List the steps to reproduce the problem below (if possible attach a sketch or…
-
hello, I just need some help, in no way is this an actual issue with Breaziles files or anything!
I have wired and coded everything up, but none of the Mandalorian symbols are showing up on my scre…
-
iam designing a light barrier for speed measuring -
to be immune against environment-light i use a `VISHAY TSSP96038` IR Receiver.
my ItsyBitsy M4 generates a 38kHz stream to pulse the sending IR-L…
-
Hello,
I was just compiling the RadioHead library for the Adafruit feather M4 and I am unable to compile as the library only supports the ATSAMD21's timers and not the ATSAMD51s. The problem is in …
-
The goal here was to read a standard hobby servo input signal.
Here's the general hardware setup, blue box is the receiver generating the signal (transmitter not shown):
![pulseio_test](https://us…
-
I'm trying to log some data on the included flash chip on the ItsyBitsy M4 and then afer a while I want to copy some data from the flash chip to a micro sd card...
But the problem is the following:
…
-
Re this thread:
https://forums.adafruit.com/viewtopic.php?f=60&t=176800
Recreated using Pi Zero W:
```python
pi@raspberrypi:~ $ python3
Python 3.7.3 (default, Jul 25 2020, 13:03:44)
[GCC 8.3.…
-
As of version 1.2.1 of the library, ATmega32u4-based boards are defined to use `Timer1` raher than `Timer3`. This configuration conflicts with `millis()` and `micros()` functions. While not too diffic…
-
So I cloned `mavlink` and `units` into my library folder. When I try to add the header:
```c++
#include
```
I get the following warnings and errors about `elapsedMillis` (and others) not bein…