-
Hi, I am just starting with AqualinkD. I believe it installed correctly as it allows me to start and stop the daemon. If I try and use the serial logger I get:
./release/serial_logger: /lib/arm-li…
-
### The problem
There are `BytesWarning` in `h2` lib during CI run:
```
/home/runner/work/core/core/venv/lib/python3.12/site-packages/h2/utilities.py:20: BytesWarning: Comparison between bytes …
-
After upgrading to 2.2.1, everything seemed to be working correctly, except one weird issue.
The light for my water feature gets stuck on. When I turn it off via the Home app, the app says it's off…
-
I have an old Aqualink RS board from 2008 (I believe rev MM), that uses a PDA for control. I recently installed a VGreen EVO motor, which I currently operate standalone based on its internal schedule,…
-
Hi, Thanks for this awesome project.
Wanted to see if you could give me a hand. Have a couple of issues.
Using Pi Zero WH + the USB connector cable you specified in the Wiki.
1. I'm not seein…
-
In case people are not aware, I've managed to get minisatip descramble encrypted streams on the box. Performance is decent, i.e., I can stream 4x decrypted channels to LAN clients.
Regarding clien…
-
### The problem
Failed to setup, no devices or entities
Thanks ahead of time, for your assistance
### What version of Home Assistant Core has the issue?
core-2024.1.3
### What was the last worki…
-
### Describe the issue you are experiencing
Followed this [tutorial](https://community.home-assistant.io/t/installing-haos-in-a-vm-on-truenas-scale/511393) to initially install HAOS on TrueNAS scale …
-
Similar to issue #185. With older versions of gcc you could have duplicate definitions of global variables as long as they are only reference in the files they are defined in. This is no longer allo…
-
After upgrading to 2.3.1, pool temp reads extremely low even though panel shows the correct temp. The spa and air temp readings are correct and agree with the panel temp. Version 2.2.2a does not have …